What is the difference between a TPP-DM1 and a TPP-DM3 coil?

Nothing in the resistance. Both read 0.15 ohms. The difference is entirely in the wattage band, which is twenty watts higher on the DM3, so it’s only worth fitting to a mod that will genuinely reach those numbers. Under-driven, it tastes thin.

Will a TPP coil fit a PnP or PnP X tank?

No. VOOPOO built three separate platforms with three different physical fittings, and none of them interchange. All three are press fit, which is exactly why the wrong one feels almost right for a moment before it refuses to seat.

Is there a mouth-to-lung TPP coil?

No. The whole family runs from 0.15 to 0.3 ohms, which is direct-lung throughout. If you want a tight mouth-to-lung draw from a TPP mod, the route is a different tank rather than a different coil.

What should a Drag 3 owner move to if the mod is still good?

Any 510 mod will take a UForce-X or PnP X pod tank in place of the TPP tank, which puts the device onto the PnP X coil platform. That’s seven resistances rather than four, and a published coil life figure.

How long does delivery take?

Nairobi & Environs : Same Day Delivery - Delivery is typically within 1 hour (30 to 90 mins). Other parts of the country : Delivery takes 12 to 24 hours depending on the courier service.

Can I pay on delivery?

Nairobi: Yes, we accept Pay on Delivery (Cash or M-Pesa) for orders within Nairobi. Outside Nairobi: Payment is required before/on dispatch via M-Pesa or Card(online payment). Gifting: If you are sending a gift to someone else, payment must be made before dispatch.

VooPoo TPP Replacement Coils

Name: VooPoo TPP Replacement Coils DM2-0.2 Ω
SKU: 69ce881aea1c013c9703a63b
Availability: InStock

TPP is a tank platform of its own. Nothing here fits a PnP or PnP X cartridge, and no TPP coil is tighter than 0.3 ohms. If your mod takes a 510 tank, VOOPOO PnP X Replacement Coils are the current alternative.

Fits
The TPP Pod Tank and TPP Pod Tank 2
The TPP-X Pod Tank
The Maat Tank
VOOPOO Drag 3 and Drag 3 TPP-X
VOOPOO Drag X Plus, Drag X Plus Professional and Drag X Pro
VOOPOO Argus GT II, Argus XT and Argus MT in their Maat edition.ns Does not fit ✕ Any PnP or PnP X cartridge or tank; three separate platforms, no crossover ✕ Any device in the Vapesoko range. TPP is here for owners of earlier VOOPOO hardware.

Not sure it is the right one? Message us on WhatsApp with a photo of the coil you are replacing rather than of the device, and we will tell you which family it belongs to before you order. The resistance is printed on the side of the coil itself. On most platforms, the pod determines which coil fits, not the model name.

A high-power platform from the generation before PnP X

TPP was VOOPOO’s answer to the sub-ohm tank market in 2021, four mesh coils, none of them above 0.3 ohm, all built for direct lung vaping at forty watts and up. It powered the Drag 3, the Drag X Plus and the Maat-tank Argus mods, and for a couple of years it was the coil a serious VOOPOO cloud vaper bought. A good many of those mods are still working in Kenya, which is why the coils are still made.

It has since been overtaken. VOOPOO have quietly removed TPP from the platform navigation on their own website while continuing to manufacture and sell the coils, which is the clearest signal a brand ever gives about where a range sits.

Four coils, and why two of them share a resistance

The DM1 and the DM3 are both 0.15 ohm, and they are not duplicates. VOOPOO rate the DM1 at sixty to eighty watts and the DM3 at eighty to a hundred, so the DM3 is the one for a mod that can genuinely deliver that power and the DM1 the one for everything else. Running a DM3 at sixty watts will not hurt it, but it will taste thin.

The DM2 at 0.2 ohm and the DM4 at 0.3 ohm are the sensible everyday choices. The DM4 in particular will outlast the others comfortably, because less power through more resistance is easier on mesh.

Which tanks and mods this coil belongs to

TPP is a tank platform rather than a pod platform, which is the neatest way to remember it. There is no TPP cartridge and never was. The coil goes into a 510-threaded tank, and that tank screws onto a mod.

What to do when a TPP device finally retires

This is worth saying plainly, because nobody selling TPP coils says it. If your Drag 3 or Argus GT II eventually gives up, the coils do not carry across to anything VOOPOO currently make. TPP, PnP and PnP X are three separate physical fittings.

The migration path is a 510 one. Any TPP mod will accept a VOOPOO UForce-X Tank 5.5ml or a VOOPOO PnP X Pod Tank DTL 5ml in place of the TPP tank, and those two run VOOPOO PnP X Replacement Coils, a current platform with a published lifespan and seven resistances instead of four. Changing the tank rather than the mod is the smaller half of the decision, and it puts the device back on a coil family that is being actively extended.

Getting a new coil bedded in

TPP coils press home into the tank base, the same way every other VOOPOO coil platform works (VOOPOO describe it as press-fit installation needing no tools). Wet the wicking ports before the coil goes in, fill the tank, and let it stand for a good ten minutes: a 0.15 ohm mesh coil in a five-millilitre tank holds a lot of cotton and takes its time.

Start twenty watts below the top of the band. A DM3 fired straight at a hundred watts on its first puff is very likely to scorch, and no amount of care afterwards brings the flavour back.

What VOOPOO say about coil life here is nothing

No figure is published for TPP in any unit. The hundred-millilitre rating that VOOPOO give elsewhere belongs to PnP X alone and cannot be read across.

Practically, the DM4 outlasts the DM2, which outlasts the DM1, which outlasts the DM3. Power is the variable that matters most, followed by how much sweetener is in the bottle.

Liquid for a platform with no tight coils

Every TPP coil is sub-ohm and every one of them is direct lung, so there is only one sensible answer: a 70/30 freebase at three milligrams. The Ultimate Juice 120ml bottles come pre-mixed at exactly that, the Doozy 100ml shortfills mix to it with their two nicotine shots, and six milligrams is the realistic ceiling.

A nicotine salt has no place in a 0.15 ohm coil at eighty watts. The volume of vapour a coil like that produces turns a twenty-milligram liquid into something genuinely harsh.

Same-day dispatch from Vapesoko Nairobi across Nairobi and the surrounding towns on an early order, and 1 to 2 business days by courier elsewhere in Kenya.

Best for

Keeping a Drag 3, Drag X Plus or Maat-edition Argus running
The TPP, TPP-X and Maat tanks
Two 0.15 ohm options with different power ceilings
A direct-lung platform with nothing tighter than 0.3 ohm
Anyone weighing up whether to replace the tank rather than the mod

Specifications

Category: Accessories
Consumable type: Replacement coils
Brand: VOOPOO
Platform: TPP, separate from both PnP and PnP X
Resistances: Four: 0.15 ohm twice at different bands, 0.2 ohm and 0.3 ohm
Fitting: Press fit into the base of a 510-threaded tank. No tools and no rotation
Build: Mesh throughout
Coil life published by VOOPOO: None for this platform in any unit
Draw styles: Direct lung only. No mouth-to-lung coil exists
Current-platform alternative: VOOPOO UForce-X Tank 5.5ml running VOOPOO PnP X Replacement Coils
Who it is for: Adult smokers and vapers, 18+. Not suitable for non-smokers or for anyone who has never used nicotine.
Delivery: Same day in Nairobi and nearby towns on an early dispatch; typically 1 to 2 business days elsewhere in Kenya

Specification	Details
Product name	VooPoo TPP Replacement Coils
Classification	Accessories
Brand	REPLACEMENT COILS
Availability	In Stock
Shipment fee	Free (Nairobi and environs same day delivery)