There is no fire button on this device and no way to set the wattage. It draws to activate, and it reads the cartridge you have fitted and applies the power that resistance calls for.
Output is automatic rather than manually adjustable. You can change the draw using the airflow slider and cartridge orientation, or choose another supported GPP resistance.
The cartridge is the setting
A GPP cartridge with the coil sealed in, shipping at 0.6 ohms. It is on Replacement Pods, and there is no separate coil on this platform. Nothing on Replacement Coils fits.
Fit a higher-resistance GPP and the device applies less power and gives a tighter draw. Fit a lower one, and it applies more. You are not overriding anything; you are telling the device what to do by what you put in it.
Two things do adjust. A slider changes the airflow, and the cartridge can be loaded either way round, which changes the draw again. Between them, there is more range than the absence of a screen suggests.
Which means the bottle is your other lever
Use a suitable 50/50 liquid and choose nicotine concentration according to the exact liquid, cartridge, device and operating-power guidance. Suitable 0.6Ω-and-above stocked pod/MTL configurations are not excluded merely because they are below 1Ω, but this does not approve every concentration at every power. Perceived smoothness or harshness alone does not establish delivered dose. ELFBAR ELFLIQ 10ml and BAR Salts are stocked as 50/50 examples. The automatic-power design does not make concentration the only influence on the draw.
ELFBAR ELFLIQ 10ml is also stocked at 10mg/ml. Use a liquid ratio and concentration supported by the fitted GPP cartridge and device instructions.
What it tells you, and what it does not
A four-bar gradient LED that pulses with each puff. No screen, no puff counter, no wattage readout. The device does not tell you what it is doing because it is not doing anything you chose.
The G5 Lite SE has a 1600mAh built-in battery and USB Type-C charging. Follow the exact model’s charging instructions. UWELL advertises up to six days of use per charge; actual runtime varies with use.
Automatic output and adjustable airflow
Automatic power selection reduces manual adjustment; correct filling, fit and liquid compatibility still matter. The downside is that when something feels off, the diagnostic path is short and specific: check cartridge seating, liquid supply, component condition and compatibility against the exact instructions before changing parts or liquid.
A GPP cartridge has an integrated coil and is replaced as a complete part. Follow its maintenance instructions, keep it supplied with liquid and replace a damaged or persistently burnt cartridge.
Product and variant overview
One device, one cartridge platform, no power control. The G5 Lite SE takes GPP cartridges, shipping at 0.6 ohms, and sets its own output from whatever resistance it reads.
Compatibility and related products
- Cartridge: Caliburn GPP, coil sealed in, ships at 0.6 ohms. See Replacement Pods.
- No separate coil. Nothing on Replacement Coils fits this device.
- GPP is shared with the G3, G4 and G5 families.
- Internal 1600mAh cell; nothing needed from Batteries.
Buying guidance
- Choose the cartridge resistance deliberately. On this device, it is the wattage setting.
- Check liquid suitability, wick saturation, cartridge condition and use together; do not assume a bottle change is the only remedy.
- Buy cartridges rather than coils. The coil is inside and is not sold separately.
- Try the cartridge loaded the other way round before deciding the draw is wrong.
- There is no fire button. If it is not firing, check the battery charge, cartridge seating and contacts, then follow the manual for any fault-light indication. Stop using a dry cartridge and refill it before vaping; dryness alone does not establish why the device failed to fire.
Kenya and Nairobi relevance
Choose this refillable if you prefer draw activation and automatic output, with airflow adjustment and compatible GPP cartridge options. Nairobi delivery typically takes 15 to 90 minutes; other Kenyan destinations typically take 1 to 2 business days.