If you own a Drag H40, one fact matters more than any other when you come to reorder: it runs the original PnP coil platform, and it is the only current device here that does. Everything else in the VOOPOO line-up on this catalogue has moved to PnP X, and the two do not interchange.
This page is about keeping the device running rather than about buying it. What fits, what does not, and what to put in it.
The coil platform, and the one that will not fit
Original PnP means the VM, TW and TR series. Those are the coils to look for, and they are under Replacement Coils under the original PnP family rather than under PnP X.
A PnP X coil will not seat in this original PnP pod. VOOPOO also lists a legacy PnP-X Pod that takes original PnP coils. Check the exact coil family and cartridge name before ordering; similar names do not make the parts interchangeable.
The pod
H40 uses a 5ml PnP Pod II with a separate press-fit coil. Empty replacement pod bodies and compatible coils are listed separately under Replacement Pods and Replacement Coils. Replace only the parts you need.
Airflow adjusts by rotating the pod, stepless through a full turn. There are no clicks and no stops, so the setting is whatever you leave it at rather than a numbered position you can return to.
What to put in it
The H40 uses original PnP coils and has a 40W output ceiling. Select liquid by the exact coil code; it's marked with the power band and liquid requirements. Suitable high-VG options include supported Nasty Juice and Ultimate Juice bottles. Doozy Cool Mint Seriously Pod Fill is a separate 50/50 option; adding nicotine shots to a shortfill changes the final blend according to the shots used. Related: Nasty Juice, Ultimate Juice 120ml, Doozy E-Liquids 100ml.
For a supported lower-power PnP configuration, compatible 50/50 liquids include stocked ELFLIQ and BAR Salts options. Choose nicotine concentration separately and follow the exact coil’s requirements. Avoid high-strength nicotine salts in high-power DTL setups. Related: ELFBAR ELFLIQ 10ml, BAR Salts.
Living with it
A 1500mAh internal cell, so there is nothing to buy from Batteries. That shelf serves the VOOPOO devices that run external cells, and this is not one of them. Power runs from five to forty watts, with a Smart mode that reads the coil and sets itself and an RBA mode that hands the wattage back to you.
The screen is a small single-colour OLED. It tells you wattage, resistance and charge, which is all you need and less than the larger Drag devices show.
Order spares for the exact coil platform and selected variant. Replace coils according to their condition, liquid supply and operating instructions.
Product and variant overview
One device, one pod. The Drag H40 takes the PnP Pod II at 5ml, with original PnP coils (the VM, TW and TR series) pressed in separately.
Compatibility and related products
- Coils: original PnP only. See Replacement Coils.
- Pod: PnP Pod II, 5ml. See Replacement Pods.
- Not compatible with PnP X coils or PnP X cartridges, despite the similar names.
- No external battery required. The cell is internal at 1500mAh.
- Liquid: match the VG/PG ratio and nicotine strength to the fitted PnP coil and its power range. Suitable low-power MTL configurations can use 50/50 liquids; high-power DTL use needs separate strength guidance.
Buying guidance
- Read the marking on your old coil before ordering. PnP and PnP X look alike in a listing and are different parts.
- The pod body and coil are separate parts. Reuse an existing serviceable compatible part when replacing the other.
- Match the liquid to the coil, not to the device. The same H40 wants a different bottle at 0.3Ω than at 1.0Ω.
- Keep the pod topped up. Firing a dry wick is what ends a coil early, whatever the liquid.
- Airflow is stepless, so note roughly where you had it before you take the pod out to refill.
Kenya and Nairobi relevance
The H40 uses original PnP coils. Order that family for its PnP Pod II and keep it separate from PnP X when selecting spares. Vapesoko delivers within Nairobi and across Kenya.